DSO Shell 150 - Battery mod v3

thingiverse

This all-in-one enclosure is specifically designed for DSO Shell/Dso 150. Print the front part without support; the back part requires printing with support, and these are relatively simple to remove when necessary. 0.2 mm print quality is recommended. You'll need the following items in addition: * 8 m3 screws (acrylic if available) * 2*m3 risers (acrylic if available) * A m3 threading rod; avoid using an electric drill, instead do it manually * A Boost converter (MKTxxx) * A TP4056 battery charger WITH protection * A micro usb breakout board * A switch * Flat batteries I'm using a custom firmware, which is why there's a connector soldered to the SWD pins (https://github.com/mean00/DSO_STM32Duino). The enclosure is more robust when paired with an older DSO 150 board. With newer boards, there is one less screw hole located at the bottom left in the provided pictures. This project is still a work in progress; I'm not satisfied with the BNC plate, but it's simple to replace if you prefer.