Drylin Style Bushing RJ4JP-01-08 RJ4JP-01-10 (LM8UU and LM10UU direct replacement)

prusaprinters

<p>Original version is the exact same thing that you can download from IGUS website. I just enlarged the center hole for PLA printing. It should fit perfectly on a 8mm rod, at least for my MK2.</p> <p>V2 is the modify version from the original, I read somewhere on the internet that said this pattern works better than the original. I cannot really confirm that or back this up. But if you are interested in trying it or test it, you can download this version.</p> <p>I do not actually design this bushing, all credit goes to IGUS or whoever design it. Again, Happy Printing.</p> <p>UPDATE:<br/> Upload the 10mm version since someone ask for it.</p> <h3>Print instructions</h3><h3>Category: 3D Printer Parts Print Settings</h3> <p><strong>Printer Brand:</strong> RepRap</p> <p><strong>Printer:</strong> Prusa MK2</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 200, 100 microns</p> <p><strong>Notes:</strong></p> <p>Design to print in PLA because it seems to work the best compare to other filaments. Print best with 3 perimeters and at least 10% infill. Layer height does not matter.</p>