Drylin Bearing Mod

prusaprinters

Hi everyone!This is a remix! However the original no longer exists and printables won't let me post it as a remix without a link to the original design. I am for now posting it as “an original design”. But I will provide as much information as I can! The original Ruthex designs are included in the files, and if anyone needs the original zip from Ruthex I can provide that as well. Thank you! I decided to switch from my stock linear bearings to some Drylin Bearings. I tried a number of metal sheaths to reach the desired tolerance but nothing in my area was really sufficient. So I found Ruthex's design and after a few prints at 100% size, 99.5% size and 99% size I found that my printer would give me a wonderful tolerance of the drylin bearings if I printed at 99% of Ruthex's design using PLA and then at 100% size using High temp PETG. Unfortunately, the original design was too thin and would crack immediately when pressing into the PETG. This prompted me to design a slightly thicker bearing sheath. my redesign lasted upwards of 2 days till the PETG cracked so I decided to use the PLA and see how it faired.FOR NOW: the PLA is working wonderfully.When printing at 99% of the actual size the print can be too tight, I used a 1/4" socket and a vice to press the bearings back out and then a 1/2" chisel to ream the inside of the bearing sheath until the desired fit is achieved.If you have any questions please ask!And here is Ruthex's original design https://www.thingiverse.com/thing:3426297ThanksPrint SettingsPrinter Brand:PrusaPrinter: I3 MK3SRafts:NoSupports: NoResolution:.1mmInfill: 100%Filament: Doesn't Matter PLA B L U E Notes: I used a .2mm nozzle!100% infill.5mm brim to help adhere to the bed.Oh and the top plate, if you want it, is the same as Ruthex's original design    Category: 3D Printer Parts