Driver Bit Case

prusaprinters

<p>This is a compact holder for a driver kit I bought off of Amazon. The kit did not come with a convenient way of organizing the bits and keeping everything together, so I designed one.</p><p>I'm uploading the files for anyone else with the same (or sufficiently similar) driver kit, and to provide some inspiration to anyone else who might be trying to solve a similar problem.</p><p>All info provide below is reiterated in this project's Youtube video:</p><figure class="media"><oembed url="https://youtu.be/1XmLo0mu4mI"></oembed></figure><p>&nbsp;</p><p><strong>Printing</strong></p><p>Standard print settings (.4 Nozzle at .2 Resolution and 15-20% infill) works just fine.<br>No supports are required.</p><p>PETG is recommended to provide the clips with some flexibility and because it tends to have a glossier finish (slides smoother) than PLA.</p><p>&nbsp;</p><p><strong>Assembly</strong></p><p>Only bit of assembly is supergluing the clips onto the top of the Shell. The two smaller clips are identical; of the two larger clips, the largest one is glued on the side with the stepdown edge.</p><p>No need to go wild with the superglue; if the clips break it would be better to be able to pry the broken one out and replace it rather than reprint the whole shell.</p><p>&nbsp;</p><p><strong>Design</strong></p><p>Refer to the Youtube video for info on how I went about designing this case.</p>