Drive Pulley 20TXL

thingiverse

A customized version of the model available at http://www.thingiverse.com/thing:16627 was created using the Customizer app. The specifications used for this design include a nut shaft distance of 4.2, two nuts with M3 hexes, a pulley B height of 15mm, and an M3 nut flat diameter of 7.7mm, among others. The profile is set to 3, while the nut depth and motor shaft are 3.0 and 8mm respectively. One retainer with a height of 1.5mm, an idler with a height of 3mm and two pieces, a pulley B diameter of 38mm, and M3 nut diameter of 4.2mm were also incorporated into this design. The nut angle is set to 180 degrees, while the additional tooth width and depth are 0.2mm and 0 respectively. There are 20 teeth in total, and a pulley T height of 12mm was also included in this model.