Drip VAT LONGER Orange 10

thingiverse

I'll print this soon to test it, and it's never been tested yet. The design is still ongoing, but the last version works well if you want to improve it, you're welcome. The last version was updated on May 12, 2019. This is a drip stand for the print plate on a LONGER Orange 10 and similar printers. It holds the print plate at an angle (30 degrees) over the resin vat so that excess resin can drain off and back into the vat. This stand can remain mounted to the printer while a print is in progress, and the main printer cover is on the printer - it doesn't need to be removed or replaced with each print. This thing was made with Tinkercad. You can edit it online at https://www.tinkercad.com/things/3742whQijyl. For Reference. It's a drip stand for the print plate on an Orange 10 LONGER and similar printers... It keeps the print plate at an angle (30 degrees) over the resin tank so that excess resin can flow out and back into the tank. This stand can stay mounted on the printer while a print is in progress, and the main printer cover is on the printer... You don't have to remove it and replace it with each print.