drill lathe FTIJPI

thingiverse

made to fit a power wrapper base but you can just screw it to whatever. Also made a version to fit 20x20 extrusions for the base but it can be screwed or bolted to whatever. some square tubing. L channel or C channel will work. I used plain wood screws for the fasteners. heat with lighter and screw in to make threads so the print wont split. Use washers with all screws 608zz bearings 8mm bolt to attach bearing with small washer on backside 1/4 20 bolts to clamp to base long hose clamp to go around drill or a few smaller ones connected first design i used spacers with the bearings to use wood screws to attach them i put that file in aswell if thats what u wanna do (non modified file) IMPORTANT Neck of the drill must be around 43-44 mm around for the clamp at the front of the drill and back of drill has to be on the same plane as the neck of the drill or you will have to modify the back support for the drill