Dremel Flex Shaft Storage Rack (pegboard compatible) with extra tool storage

thingiverse

This is a compact storage rack for the Dremel Flex Shaft attachment, available at Amazon here: https://www.amazon.com/Dremel-225-01-Flex-Shaft-Attachment/dp/B0000302Y8/. It is compatible with pegboard, featuring standard 1/4" holes spaced 1" apart, and also includes custom mounting solutions. Additionally, it has storage locations for a Dremel wrench, several Dremel tools, and the unique chuck that comes with the Flex Shaft. **Instructions / notes:** * Print out one "Dremel Flex Shaft Rack.stl". The rack is approximately 6" long. If it's too big for your printer, print out a "Dremel Flex Shaft Rack Right.stl" and a "Dremel Flex Shaft Rack Left.stl" and attach them together. * To store Dremel tools on the rack, you may need to glue small magnets (3mm diameter by 1.5mm thickness) into the horizontal holes for added holding force. * To pegboard mount the rack, print out two "Flex Shaft rack pegboard pin.stl" and attach them to any two of the 1/4" holes in the rack. Be cautious to set the pins at the correct depth. For my pegboard, the depth is approximately 10mm, leaving 5mm of pin sticking into the pegboard. Yours may be different. I recommend inserting a pin in your pegboard, marking a line for the depth, and then gluing it to that line. * If you're not using a pegboard, you can mount the rack as desired using the provided holes. The rack features four 1/4" holes and two M4 holes spaced as follows: + The M4 holes are 50mm apart. + The center 1/4" holes are 1" apart. + The outer 1/4" holes are 5" apart. * You can design your own mounting bracket or use the simple right-angle mounting bracket I've included ("Simple angle bracket.stl"). I've also included a bracket for mounting on an Ikea RÅSKOG Utility cart: http://www.ikea.com/us/en/catalog/products/20271892/ ("Cart bracket.stl"). It should also work on any 0.875" diameter shaft.