DreamPi - Raspberry Pi B+ / 2 / 3 Case With Cooling Fan

thingiverse

Iconic Sega Dreamcast Case for Raspberry Pi B+ / 2 / 3 Fits seamlessly with a 30mm x 30mm x 10mm Cooling Fan; simply refer to GPIO Pins for Power Source. Requirements: Cooling Fan: Secure with 4 Screws + 4 Nuts Raspberry Pi: Attach with 4 Screws Case: Fasten with 2 Screws To assemble the case, use a Raft + Supports for the Top part, as printing it without supports is not possible. Similarly, print the Bottom Part using a Raft to avoid visible deformations (warping). Decorative little parts must be glued onto the case. If screw holes are too tight, don't hesitate to enlarge them with a small screwdriver's head. To ensure a snug fit for your power plug in the cutout, lightly file the plastic if necessary.