Dreadnought Fidget Spinner

myminifactory

The Dreadnought is a cutting-edge Fidget Spinner featuring an all-encompassing design. It offers two distinct bearing options: 11mm and 14mm, both of which are smaller than standard spinner bearings. The crucial specifications for the bearings include a thickness of exactly 5mm with an inner bore diameter also measuring 5mm. To identify the correct pair, simply refer to the provided .STL files. The weights used in this design are standard M8 nuts, and American enthusiasts can easily locate their imperial equivalents by conducting a quick online search. Due to the smaller bearing size compared to typical 608 bearings, the spin duration may be shorter than expected. However, the main focus of the Dreadnought is its visually stunning appearance. To assemble the Dreadnought Fidget Spinner, you will need the following materials: 1. Printed parts 2. A 5mm x 11mm x 5mm bearing or a 5mm x 14mm x 5mm bearing 3. M8 nuts (or their imperial equivalents) 4. Glue (Super Glue works effectively) 5. Clamps To assemble the spinner, follow these steps: 1. Print your parts according to the design specifications. 2. Place the nuts and bearings in one side of the spinner. 3. Apply glue to one side of the spinner. 4. Clamp both sides together, ensuring proper alignment, and let them dry completely. 5. Add a small amount of glue to one end of the bearing handles. 6. Carefully place the bearing handles into the center of the spinner, taking care not to get any glue on the bearings. 7. Use clamps to secure the handles in place and ensure they remain straight as the glue dries.