Drawers for IKEA DVD/CD shelf BENNO (and GNEDBY?)

thingiverse

This set of drawers will fit the DVD shelf from IKEA called BENNO. BENNO is no longer available and has been replaced with GNEDBY. The drawers have been tested on BENNO, but they should also fit GNEDBY. This project is still a work in progress. The existing drawers are working well, but you cannot fill the shelf with them yet. I need to design a few more for that purpose. The first set of drawers is 1 unit high, which means you can have one drawer for every row of holes. I will add some more later that are 2 units high (roughly 60mm deep inside). Each drawer has a 1mm thick slot where you can add a sign. The paper should be 55x25mm in size. Simply slide it in from the top. Some parts of the shelf do not have any holes, so I may add a really big drawer to fill that space. You don't have to fill the whole shelf with drawers. They will fit nicely under another shelf. At 100mm/s, I print a 16-slot drawer in 4:40. It requires a significant amount of material, but then again, it is much larger than most sorting boxes I have used before on thingiverse. Since each drawer is so big, you can fit a lot of screws in it and they are quite heavy (I used around 1kg worth of screws in one drawer). So I had to make the walls 1.5mm thick or the drawers wouldn't be sturdy at all. Print 2 gliders for each drawer. When you mount the glider, use the "long" end outwards. You'll see once you print them what I mean by the long end. I added two new gliders that are now different for different sides and that is because I added a "hook" after some input from a fellow printer-guy. They point with the hook so that you can "hang" the drawer and it hopefully won't fall down while you pick stuff out from the drawer. I also added a drawer with flexible wall (from 4 to 16 slots). Just print as many flex walls that you need for it. Additionally, I added a word-file to help print nice signs. Keep your text well inside the border (3mm of the sign is hidden in the drawer). Make sure each cell stays 55x25mm before you print. I further added 4 new STL with double height and 2, 3, 4 or 6 compartments. Measurements on compartments (all in mm) are as follows: H2S4: W:78.75, L:73.00, D:56.50 H2S6: W:78.75, L:48.50, D:56.50