Drawer Insert (FreeCAD, parameterized)

prusaprinters

<p>Parameterized Drawer Insert with presets for Allit EuroPlus, Festool/Makita Systainer, Bosch/Sortimo Boxx.</p><p>They all have a rim on the top.</p><h3>Measurements</h3><p>Outer Length/Width/Height is always used as the outer measurement, so if you do not want a bed plate and or feed, set the Bed Plate/Feed Height to e.g. 0.0001 mm and also fix Bed Plate Chamfer to a lower value. The values cannot be set to zero otherwise there are calculation errors.</p><p>If you do not want the label than you can hide it.</p><p>In the custom settings I added wall thickness dependent on the Length Count so it is stable for longer walls.</p><h3>Presets</h3><p>Bind B5-B22 in spreadsheet "Measurements" to the columns of the predefined values or create a new one.</p><h3>Print</h3><ul><li>Printer: Prusa i3 MK3S+</li><li>Slicer: PrusaSlicer &gt;= 2.5.0</li><li>Filament: PETG (different brands)</li><li>Supports: None</li><li>Infill: 15%</li></ul><p>Attached 3mf files are tested with Jayo PETG black. It is a little bit challenging to get the proper settings for fast print with no wavy walls and that the model sticks to the bed without warping.</p><p>So for the big 2x2 model there are different settings than for the [123]x1 models for fan speed and bed temperature.</p>