Drain Cover with Washing Machine Hose Slot

prusaprinters

<p>This is an improved version of the drain hose cover, the one that you are able to open the cover to dump something inside. Although I did buy a replacement but the supplied drain mainly used for the washing machine didn't fit due to the drain pipe and the cover didn't align properly.</p> <p>I did this so that those pesky roach didn't get into my apartment because when using the washing machine, we will have to open the drain cover and put the hose inside.</p> <p>This, however, you just plug the end of the drain hose into the cover, max diameter is 34mm.</p> <p>There are 3 of those drain cover included</p> <ol> <li>The pins will be printed along with the cover</li> <li>Pins are separate but the hinge are a bit short</li> <li>Just like 2 above but 1mm longer (not tested yet)</li> </ol> <p>Print several pins, more than 2 are recommended as you might lose some of those pins</p> <p>"Drain hose4.stl" requires "drain hinge.stl", this is for easy print and replacement of the hinge part</p> <h3>Assembly</h3><p>The assembly of the one with pins are easy, put one of the pins first into either side fully and another still flushed.</p> <p>Put the cover into its designated slot and push the flushed pin so the cover will stay in place.</p> <p>Carefully open the cover to avoid the hinge/pins being damaged.</p> <h3>Print instructions</h3><p>No supports needed to print these</p>