Dragon Pencil Cup [Cura 5.4 Tree Support]

thingiverse

The Improved tree supports now use less material and print faster, making them easier to remove and resulting in a cleaner final print. Also a big shout out to community member @ThomasRahm who originally proposed and created these new improvements. You can use this model to test the newly introduced settings: >> Maximum Branch Angle >> Trunk Diameter >> Branch Diameter >> Branch Diameter Angle >> Preferred Branch Angle >> Diameter Increase to Model >> Minimum Height to Model >> Initial Layer Diameter >> Branch Density >> Tip Diameter >> Limit Branch Reach >> Optimal Branch Range >> Rest Preference Are you curious to try it for yourself? [Download UltiMaker Cura 5.4 here.](https://github.com/Ultimaker/Cura/releases) Do you have some feedback for Cura? [Leave a request on our GitHub.](https://github.com/Ultimaker/Cura/issues) The model has been designed by [Puru Maz](https://www.thingiverse.com/purumaz/designs) or [(@purumaz)](https://www.fiverr.com/purumaz), to demonstrate the new Tree Support. | Cura Setting | Value | |------------------------------|---------------------| | Generate Support | ✅ | | Support Structure | Tree | | Maximum Branch Angle | > 40 ° | | Branch Diameter | 5 mm | | Trunk Diameter | 25 mm | | Branch Diameter Angle | 7 ° | | Support Placement | Touching Buildplate | | Preferred Branch Angle | 27 ° | | Branch Density | 10 % | | Tip Diameter | 0.5 mm | | Limit Branch Reach | ✅ | | Optimal Branch Range | 30 ° | | Support Overhang Angle | 60 ° | | Support Density | 0 % | | Enable Support Brim | ✅ | | Support Brim Width | 0.75 mm | | Support Brim Line Count | 3 | | Support Z Distance | 0.2 mm | | Support X/Y Distance | 0.7 mm | | Support Distance Priority | Z overrides X/Y | | Minimum Support X/Y Distance | 0.2 mm | | Minimum Support Area | 0 | | Enable Support Interface | ❌ | | Fan Speed Override | ❌ |