DPH5005 Enclosure (customizable)
prusaprinters
My version of a DPH5005 case. It is done in OpenScad so it is easily modified. All connections are in the front and rear panels.This has a 4 jack powerpole input on rear. The top two inputs are used as an on/standby. I use an old XBOX 12V power supply. The switch is used to connect the XBOX 5V to the standby line. The bottom powerpoles are the 12V input. The rear panel has a cutout and a mount for the the micro usb communication module. The front panel has a powerpole connection for the output.Note: the LCD panel is a little tight. In goes in easy but it is a little tough getting back out.Print SettingsPrinter Brand:PrusaPrinter: I3 MK3SRafts:Doesn't MatterSupports: Doesn't MatterResolution:0.2Infill: 20%Filament: doesn't matter petg doesn't matter Notes: I used 3 perimeters. The power pole mounts should be printed with 100% infill. No supports needed for anything.Post-Printing =============To assemble you will need:1) print: 1 front panel, 1 rear panel, 1 top, 1 bottom2) print: 2 single PP mounts, 2 double PP mounts14 M3x8 screws, 14 M3 brass inserts2x 2mm self theading screws for the usb module1 DPH5005-USB 50V/5A with USB interface Category: Electronics
With this file you will be able to print DPH5005 Enclosure (customizable) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on DPH5005 Enclosure (customizable).