Dooria Sliding Door Guide Extender

thingiverse

This is an extender for the Dooria sliding door guide. One of my sliding doors had excessive clearance to the floor so the original guide was not high enough to reach the groove in the door. The guide was also too far into the wall so the door would sometimes fall out of the guide when closed. I used a two-part epoxy adhesive to attach this extender to the original guide and it is very solid. See before and after pictures. The one that I printed was the "Skyvedørguide_1.stl" as shown in the pictures. I also created some other different versions: Skyvedørguide_1.stl: Extra height: 5 mm, Extra length: 14 mm (about 11 mm clearance to the floor for floor molding trim. See picture) Skyvedørguide_2.stl: Extra height: 5 mm, Extra length: 14 mm Skyvedørguide_3.stl: Extra height: 2 mm, Extra length: 14 mm Skyvedørguide_4.stl: Extra height: 5 mm, Extra length: 7 mm Skyvedørguide_5.stl: Extra height: 2 mm, Extra length: 7 mm