Doorbell Nap-Time Sign

prusaprinters

A very basic albeit overkill cover and sign for a simple doorbell. This is a multi-material print, you will want to print the sign face up, and insert color changes for the embossed text. Be mindful to pick contrasting colors!Version 1 is designed to slip over the top of the doorbell (you'll have to add some spacers to the existing doorbell for room). It prints in one piece no supports (the overhangs are simple geometries and should have enough clearance over the existing doorbell button). Insert color changes at around 3.2mm & 5.3mm (for a .3mm layer height). Version 2 is two pieces; one is a mounting plate that goes behind the existing doorbell, and the second piece slides onto the mounting plate. While this is more convenient than adding spacers to the existing doorbell button, the second piece requires substantial supports. I also reduced the embossed text height to save time/material and used a thinner backboard. Insert color changes at 2mm and 2.8mm.I found this was just enough text to get people to pay attention.