Door opener, corona, hands free, quick to print, covid

prusaprinters

<p>Hi,</p> <p>this is my first model, quick to print in 0.3mm layer height.</p> <p>You just need 2x M5x20mm screws + nuts.</p> <p>The diameter for the door grip is 20mm.<br/> To make it fit better, you can put some double sided tape or rubberband between the doorhandle and your printed opener.<br/> This makes sure, that it don´t turn around if you pull it hard.</p> <h3>Print instructions</h3><p>Layer height 0.3mm (standard prusa slicer settings, no changes)<br/> Material: PETG<br/> Infill: 20%<br/> Printtime: 2h 6min</p> <p>You need 2 pieces of M5x20mm screws, plus 2 nuts.</p> <p>If the nuts don´t fit, just use a longer screw, to pull the nuts into the printed model. (prusa trick)</p>