Doggy Button

thingiverse

See / edit it here in Fusion 360: https://a360.co/2UGFDIZ WORK IN PROGRESS ================ This training toy is designed for dogs, allowing them to dispense treats when a button is pushed. A treat approximately 1cm in size can be placed in the hole at the top. Parts ===== * Rubber bands of any desired length are required. * Three M3-inserts (each measuring 3x4x4) are needed. * Six components, including three round head screws and three M3x10 screws, complete this list. * One PTFE tube, measuring 4cm in length and with a diameter of 4mm, is also required for optional use. * Essential parts include one Bottom, one Insert, and one Deckel. * Additional components consist of three Plug (for the bottom) and three Plug2 (for the top). Note: While the plugs can be placed anywhere, one is slightly shorter than the others. Assembly ======= To ensure smooth movement when using optional PTFE tubes: * Insert the PTFE tubes into the slots at the corners of the "inlay" print. * Slowly insert the insert into the bottom part. If necessary, sand or cut the outside of the tube to achieve easy insertion. * Next, install the M3 brass inserts with a soldering iron or matching tool as shown. * Assemble the deckel and insert parts together. * Secure rubber bands between top and bottom using the top (Plug) and bottom (Plug2) plugs. * Insert the assembly into the bottom part. * Mount with M3 screws.