Dog wheelchair

thingiverse

# Dog Wheelchair Check out the GitHub repository for this project: https://github.com/otis22/dog-wheelchair. This dog wheelchair is designed to be flexible and accommodate small dogs weighing less than 3 kg. To print all the details, navigate to the /wheelchair-stl folder. The corner holder requires eight separate parts, which can be found in the corner_holder_8.stl file. For the frame, you'll need an 8mm aluminum tube, with a length of 2 meters suitable for my dog's needs. ## Nuts Here are the necessary nuts: * M3 (DIN 7985) x 18mm - 16 pieces for corner holder * M3 (DIN 7985) x 12mm - 4-6 pieces for capron tape holder * M3 (DIN 7985) x 16mm - 4 pieces for wheel shaft * M4 (DIN 965) x 32mm - 4 pieces ## Bearing For the bearing, I recommend using U-grooved ball bearings with a diameter of 13mm, available in packs of eight. You can also use other bearings with similar specifications. ## Rotate Platform I initially designed a rotating platform for the front wheels but found it wasn't suitable for my dog's needs. If you require this feature, feel free to let me know. ## Cost The estimated cost of building this wheelchair is between $10 and $20 in Ukraine.