Dog Bowl Stand

prusaprinters

<p>CHECK OUT THE BETTER, UPDATED VERSION!<br><a href="https://www.printables.com/model/139888-dog-bowl-stand-remix">https://www.printables.com/model/139888-dog-bowl-stand-remix</a></p><p>-------------------------</p><p>I needed a stand to elevate the water bowl so I made this. It's an old design I revisited yesterday when I needed to print a second. I added proper threads for larger screws and added pegs to help with alignment. Not my best work, but it's functional and the old stand has been holding up for probably 2+ years now. Print works on a Prusa MINI.</p><p>-Requires 8 M5 screws 10-15mm length</p><p>-Print 4 legs, 2 short sides and 2 large sides</p><p>-Make sure your infill around the threaded holes is sufficient (I used 20%). You can use a modifier shape in PrusaSlicer in the threaded areas to set the high infill. The rest of the print is fine with 5% and 3 perimeters.</p>