Document cam stand for logitech webcams

prusaprinters

<p>I needed some form of document camera to be able to digitize hand-drawings reasonably fast.</p><p>Since they're 60+ Euros and I had a webcam around I decided to build a stand for the webcam.</p><p>Additional material required:</p><ul><li>2x40cm 8mm rod/pipe/whatever (for a c930e to capture A4 landscape, if you have another camera your mileage may vary)</li><li>M3 screws, I've used M3x16, you will need at least 2, I've used 7</li><li>a Bessey TK6 60/22 if you want to clamp it to a table</li><li>some sort of board, 30x30cm or so if you don't want the clamp</li><li>a screw to get your webcam mounted - ¼-20 is what fits cameras.</li></ul><p>there's two more files than required here - the drillguide to get the base properly aligned on a board and the uni-clampplate, I've used that as a stabilizer.</p><p>&nbsp;</p><p>You'll need to cut M3 threads into the foot and the cam-mount, if you want to use the uni-clampplate as well then print that twice, drill one to 3mm and cut M3-threads in the other one.</p><p>&nbsp;</p>