Do Not Feed Chicken Sign

prusaprinters

<p>The best way to print this sign is using a multi color printer like the i3 MK2 with MMU2. However, you can follow instructions like the one attached below to handle the filament changes manually.</p><p>Red and black colors are extruded into the white part by 0.4mm. So it is recommended to use a 0.2mm layer height to print this sign.&nbsp;</p><p>PLA is fine, PETG lasts longer when used outside.</p><p>The model is roughly 200mm wide. In case you scale it, take care 0.4mm * scale factor is a multiple of your layer height. Scale factors like 1.5, 2.0, 2.5 etc are fine when using 0.2mm layer height.</p><p>Like for all multi color pictures, print the sign with the front side down - this will give you a perfect surface.</p><figure class="media"><oembed url="https://www.youtube.com/watch?v=dXbTw9YBUNQ"></oembed></figure><p>&nbsp;</p><p>&nbsp;</p>