DNA Brace

prusaprinters

<p>I designed this as a Z-Axis anti-vibration brace for my FLSUN Prusa i3. The little clips click into the 6mm channel on 20X20mm extruded aluminum frame pieces. There is a hole for a 4-4.5mm bolt to lock the clips in place.<br/> Vibration is (at least empirically) much better on the side with the brace installed as the other one was printing. (Edit - Both in now, much improved Z-vibes)<br/> Sure, a heavier brace could be designed, but I wanted to showcase a bit and look cool. This is actually pretty stiff, and it's vibration we're eliminating, not holding huge mass anyway.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Prusa Clone</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div><strong>Resolution:</strong></p> <p>0.2mm</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>15% Honeycomb</p></div></p> <p><strong>Notes:</strong></p> <p>Printed in ABS but PLA should/might work too. Fits on a 200X200mm glass bed with rounded corners, but not by much, so maybe keep the skirt close in...</p> <p>Recommend min 3 perimeters.</p> <p>Maybe take your time removing the support material from inside. I used a set of woodcarving knives/chisels and a small needle-nosed plier.</p> <p>Took 6 hours on my rig, printing ~63mm/s.</p> </p></p></p> Category: 3D Printer Accessories