dlt-mega DUAL HEAD

thingiverse

No prints yet, but plans are underway to utilize this setup soon. Print Settings Notes: separation = 40; // Distance between ball joint mounting faces. offset = 33; // Same as DELTA_EFFECTOR_OFFSET in Marlin. (center to rod centerline) mount_radius = 12.5; // Hotend mounting screws, standard would be 25mm. hotend_radius = 8.25; // Hole for the hotend (J-Head diameter is 16mm) push_fit_height = 6; // Length of brass threaded into printed plastic. May need to minimize to 3mm, (height-push_fit_height=hotend recess distance) push_fit_radius = 6; // Increased to 6 for hex on ptfe tube quick connect(PC04-01) eff_height = 8; eff_recess = 1.5; // Decreased to 1.5 to enhance clamping bracket_height = 6; bracket_offset = 20; bracket_radius = 6.25; // Increased to 6.25 for better fit bracket_recess = 1.5; // Decreased to 1.5 to enhance clamping cone_r1 = 2.5; cone_r2 = 14; // Dual head variables dual_oc_spacing = 25; // E3D heat sink dimensions rim_radius = 8; center_radius = 5; rim_catch_radius = 6; rim_height_top = 3.7; rim_height_bottom = 3; center_height = 6; heatsink_total_height = 42.7; heatsink_height = 26; fin_height = 1; fin_space = 2.5; fin_radius = 11.15; heatbreak_radius = 2;