DJI Tablet Mount

prusaprinters

This is a tablet mount I designed for my Galaxy Tab S3 and the controller for the DJI Mavic Pro. I designed it in Fusion 360 and then 3D printed it. I ask that if you download, print, and enjoy the design yourself consider leaving a tip. Getting everything just right took a fair amount of time. Please do not use the design for profit. Here's some of the specific info for the mount: Mounts to any GoPro Mount Four 10mm screws are needed, 2 are optional. You will also need 4 nuts. Hex is required for the adjustment portion, but square will work on the bottom plate as well as the optional controller mount portion. One 25mm screw for the bottom plate The springs are 2 springs 22mm x 9.5mm, 7.5mm inside diameter (.85 in x .37 in). I got these from Home Depot in a pack of 84 assorted springs for $5. I've designed and printed this with PLA which is plenty strong. I printed 4 perimeter walls thick, although my first test print was only 2 walls thick and was surprisingly strong still (20% infill). If you do use ABS you may want to print a partial part and check how the screws and nuts fit. I imagine you may have to increase scale by .5 to 1%.