DJI Robomaster S1/EP Infrared Distance Sensor Bracket

prusaprinters

<p>DJI Robomaster allows you to add the Infrared Distance Sensor on EP but in a terrible position right under the gripper. I tried to tape it with double-sided tape in the front of the hit detector but for better accuracy, the sensor needs to be at a higher position. So this bracket would just do that.&nbsp;</p><p>I used the power connector module between the mainboard and the sensor.&nbsp;</p><p>You would need:</p><ol><li>2x M3 6mm from the box B to attach the sensor to the bracket</li><li>for the bracket to the frame you can use 2x M3-H i believe 12mm with Nylok nut. i used my spare nuts from my 3d printer 2x M3 10mm screws with M3 nuts</li></ol><p>Print instructions:</p><ol><li>PLA will do.</li><li>No support is required.</li></ol><p>&nbsp;</p>