DJI Phantom Quadcopter Drone Universal Tablet Mount

thingiverse

Revised for wider tablets, this design fits the Phantom 3 Standard transmitter but may also work with other transmitters. The grip on the transmitter where it mounts is approximately 94 mm from center to center. A universal tablet mount that holds tablets and phones from 3.5" up to 8" in width, a "longer pad" file will even accommodate tablets up to 10" in width. Extremely rigid when mounted to the transmitter, this design brings your tablet 3" closer to your eyes while keeping controls unobstructed. Most holes must be drilled to fit whatever size bolts you use and the tablet holder clips on the bottom will need screws or glue to hold them in place. For tension on the clips, rubber bands can be used, stretched from the bottom clips then underneath the tablet and pad mount before hooking over the top mount. The included files are for the transmitter mount, the pad and clip as well as a file for 4 clips and a full plate version. The full plate version requires a printing area of approximately 149 mm X 184 mm. Print Settings Printer: New Matter Mod-T Rafts: Doesn't matter Supports: No Resolution: .2 Infill: 15%