DJI Phantom 4 Pro iPad Air 10.9-inch 4th Gen Adapter

cults3d

This is a simple adapter which allows mounting an Apple iPad Air 10.9 inch 4th Generation tablet onto the controller of a DJI Phantom 4 Pro (v2.0). May also work for DJI Inspire 1 and Inspire 2; you'll have to let me know. There are two STL files. One is the actual adapter, and one is a test-fit jig. Since the design relies on a snug fit, printing the test-fit jig first to verify sizing/scaling can save filament and time if the printer is a bit out of calibration. You can adjust scaling in your slicer a bit until the test fit jig just slides on and stays-put on its own before printing the actual adapter. I printed the adapter Standing on its end using tree support in Cura. When installing the adapter on the controller put the front edge with the nub in place first, then rotate the back up into place. This is better than trying to snap the nub over the edge of the mount.