DJI Phantom 2 P330Z FPV mount

thingiverse

I designed a setup for a customer to utilize their TS58500 mini 5.8GHz FPV video transmitter with their Phantom 2 (equipped with Zenmuse 3D Gimbal). Note: You will need to fabricate a wire to connect the video transmitter correctly; this connection is not visually represented. If you are not experienced with such tasks, seek assistance. My customer unfortunately blew a fuse on the main board due to his own missteps. Instructions Note: You will need to fabricate a wire to connect the video transmitter correctly; this connection is not visually represented. If you are not experienced with such tasks, seek assistance. My customer unfortunately blew a fuse on the main board due to his own missteps. Print the mount and two of the spacers. Acquire some longer M3 fasteners (10mm long will suffice). Cautiously remove the landing gear; you will need to carefully detach the wiring looms and antennas as you accomplish this. Place the mount and the spacers in position and then run your wires back through, then install the landing gear and tighten it securely.