DJI Mic Receiver Locking Cold Shoe Screw Adapter

prusaprinters

This is a locking cold shoe adapter for the DJI Wireless Mic. This allows the receiver to be mounted using loose cold shoes often found on camera cages using a nut.I have tested this in multiple hot/cold shoes on different camera brands and have not found any issues. You Will Need To Print1 - Adapter1 - Nut AssemblySlide the adapter into the desired hot/cold shoeThread the nut onto the adapter with the flange facing down.Attach the DJI Mic Receiver to the adapter. Receiver will snap into place. Print Settings***Print parts as oriented in the STLs.*** Parts that are pictured were printed on an Ender-3 v2 with the following settings:Material: Any (ABS/ASA recommended if printed parts will be used outdoors or kept in hot environments)Nozzle: 0.4mmLayer Height: 0.12mm (0.2 is fine)Extrusion Width: 0.4mmInfill Percentage: 80% (Can be lowered. I would recommend no less than 40%)Wall Count: 4 (Can be less. I would say a minimum of 2 would be required)Solid Top/Bottom Layers: 5 (Can be less. I would say a minimum of 2 would be required)Supports: On (Needed to support area below threads on adapter) Say ThanksAll my prints are free and will remain this way. With that being said, if this print helped you out or you would like to support me and my work, consider donating to me directly at: PayPal Happy recording!