Dji Mavic 2 Enterprise Cover/Mount

prusaprinters

<p>In this project you have available 2 models</p> <p>Cover</p> <p>If you broke clips on top cover(what is really easy to do) you can replace top cover with this one.</p> <p>Cover can hold without screws only by friction between plastics, but recommending to fix it with 2 M3x10 screws, best with flat head.</p> <p>You can post process top surface with sandpaper to increase aerodynamic.</p> <p>Mount</p> <p>If you want to create your own attachment for M2E/D, you can use this model in STEP format as baseline. This Mount model is significantly thicker than Cover.</p> <p>Recommending to use same printing direction as is designed, since in this way you will not suffer from reduced strength between layer bonds.</p> <p>Fixing is designed for 2 M3x12 screws.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>TEVO</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Tornado</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Notes:</strong></p> <p>Print settings:rn- Models are optimised for max 0.4mm nozzle. rn- Recommending to use brims because of small bottom surface area.rn- Support geometry is included in geometry</p> </p></p> Category: R/C Vehicles