DJI F550 Landing Gear

pinshape

DJI F550 Landing Gear Made from 2mm Plywood Initially, Then Recreated in 3D. The initial landing gear for my DJI F550 was crafted from 2mm plywood, but I later decided to recreate it using 3D modeling techniques. Although my current 3D printer is not capable of producing this design yet, I plan to scale up the model soon. Any suggestions or editing advice would be greatly appreciated, and feel free to share photos if you've successfully printed this landing gear. My plywood version was surprisingly lightweight and incredibly strong. This particular design features a space for mounting and protecting a 4-cell battery underneath the chopper, which helps reduce its center of gravity. I've built several versions of this landing gear for friends, but unfortunately, only one has been damaged due to a severe failure caused by my naza fly-away problem. Fortunately, the landing gear took the brunt of the impact, saving the rest of the quadcopter. After repairing the damage, I returned to my laser machine and redid the landing gear in just an hour. I was back up and running quickly thanks to this quick fix. In addition to the landing gear, I also built a custom box for my F550. The box is easy to transport due to the caster wheels attached underneath. I'll see if I can find the DXF files and upload them as well. To use Cura properly, please make sure to scale the design to 100%. Unfortunately, I'm not familiar with how to fix this issue myself, and I'm not proficient in 3D creation software. Just ensure that the dimensions are set correctly: Width: 281.7mm, Depth: 296.1mm, Height: 166.6mm. Please refer to the attached picture for further guidance. To use Cura settings properly, please make sure to set the dimensions as follows: Width: 281.7mm, Depth: 296.1mm, Height: 166.6mm. Please refer to the attached picture for further guidance.