DIY Shelf/Shoe rack cupboard furniture

thingiverse

These are plug-in connectors to build a DIY shoe rack or shelf in a honeycomb design with a few wooden boards. They are designed to fit to 18mm wooden boards. The clamp distances of the connectors are 17.5mm. Unfortunately my wooden boards were not of good quality and their thicknesses were around 16.5-17.8mm. Keep this in mind and adjust your wooden boards, if necessary. They will hold everything together sturdily -they are thick enough and PLA is strong enough-, but they will not fit as good as intended and there will be some gaps between the boards and the connectors. You are free to choose the length and width of the wooden boards. For example, my wooden boards are 365mm and 190mm long and 300mm wide respectively. The total dimensions of my rack are 780x305x960mm. Of course you can use less or more connectors to scale the shelf/rack. To print my version you need: 1x Connecting piece 0°+60° bottom left_ 1x Connecting piece 0°+60° bottom right_ 1x Connecting piece 0°+120° bottom left_ 1x Connecting piece 0°+120° bottom right_ 1x Connecting piece 0°+120°+180° bottom left_ 1x Connecting piece 0°+120°+180° bottom right_ 8x Connecting piece 0°+60°+120°_ 8x Connecting piece 0°+60°+180°+300°_ 6x Connecting piece 0°+120°_ 6x Connecting piece 0°+120°+240°_ 5x Wooden boards with length 365mm 20x Wooden boards with length 190mm I printed the connectors with PLA. They are stable enough but probably ABS would be a better material for this purpose. My shoe rack has held reliably for about a year without any problems.