DIY RC Reel Mower

prusaprinters

<p>After printing these parts you can assemble and test an RC Fiskars reel mower as a DIY project.</p> <h3>Print instructions</h3><p>Most of these parts are better as PETG.<br/> Make sure to mirror one set so you have Left and Right components.<br/> Experiment with solid and infill areas to get the strength you feel you need. Too solid and you'll have thermal deflection and the parts won't print right, they will peel.</p> <p>The board connecting the back needs to fit your brackets, and allow alignment of your drive gears. I used 3/4" plywood.<br/> Pocketed areas are for standard 1/4-20 hardware (nuts/bolts)</p> <p>Motors are from junk hoverboards. I used Hover-1. Some will be noisier and harder to get to work with ODrive properly.</p> <p>I applied a small amount of Gorilla Glue between areas as needed such as to more firmly bed the motor shafts and at the interface between motor and gear to prevent slippage.</p> <p>Bearings are 6004-2RS</p> <p>ODrive is 56V No connectors: <a href="https://odriverobotics.com/shop/odrive-v36">https://odriverobotics.com/shop/odrive-v36</a></p>