DIY Porsche GT3 buttonbox for simracing

cults3d

Made this a while ago for myself. I wanted it to look like the Porsche GT3 buttonbox and a bit like the one from Fanatec with a screen. It had to fit a d-shape wheel from OMP or Motamec or a cheap aliexpress wheel. So i made one that would fit a 0,96" oled screen. For this build you need 2 arduino's because the oled needs a lot of frame buffers. Also use a Nano for it. For the buttons you could use a Pro Micro. On how to use the screen look at here: https://github.com/SHWotever/SimHub/wiki/Arduino-SSD1306-0.96%27%27-Oled-I2C#restrictions To use 2 arduino with only one usb. Use one of these hubs: https://www.tindie.com/products/tinkerboy/tinkerboy-4-port-usb-hub-breakout-board/ https://www.tindie.com/products/mux/microhub-the-smallest-usb-hub-with-connectors/ https://www.tindie.com/products/mux/4-port-nanohub-tiny-usb-hub-for-hacking-projects/ https://www.yoctopuce.com/EN/products/extensions-and-networking/micro-usb-hub-v2 Materials: 12mm push buttons 2 rotary encoders or 2 knitter switches 0.96" oled screen Arduino Nano Arduino Pro Micro M5 - 12mm (countersunk) M5 - 40mm (countersunk) m2 - 8mm m2 - nuts m3 - 12mm m3 - 8mm m3 - nuts GX12 4 pins connector 10x5 neodymium magnets. (I prefer N52) D-shape wheel from Motamec, omp or AliExpress For personal use only - non commercial - not for resale. You cannot sell the digital model, a derivative or adaptation of the model, nor can you sell prints of the model. If you have any question, if you want to talk about the project, if you want to speak to other builders or if you are interested in new projects, join my Discord: https://discord.gg/mN3FwkN9WB