DIY Polishing Station Modified Parts

prusaprinters

Extra and modified parts for my build of the DIY Polishing Station. I used a Decor 12.5L Tellfresh Super storer as the basis for my version.During my build of the original DIY Polishing Station by chiz I found my humidifier was slightly different and the STL files for the cover were corrupted so I remodelled to suit the one I had. I imagine many of them are slightly different.Additionally I had only much smaller pogo pins available so I remodelled the mounting to accept the smaller ones. The holes are slightly undersized and should be reamed just enough to slide the pins in.This remix includes a large base on which to mount the Decor container and house the electronics. It also includes a new LCD display housing. The base is quite large and requires a 300x300 printer to complete.I used threaded inserts and stand-offs to mount the electronics. Getting the encoder wheel into the LCD housing is a little tricky, I had to rotate it into position and while one encoder I had fit, the other did not.