DIY Filament Runout Sensor
cults3d
A basic filament runout sensor. Required Parts: - Kw10 z5p Micro Switch (Or another switch of the same size) - x3 M3x10mm Bolts and Nuts - x2 M2x10mm Bolts and Nuts - x2 Teflon Tube (about 20mm) (optional) Connection: You can use this sensor on any printer. Connect one of the pins of the switch to the data and the other to the GND pin. Thats it. *I recommend using the C and NC pin of the micro switch. Firmware Configuration: - Find //#define FILAMENT_RUNOUT_SENSOR and remove the slashes (//) - Make sure the lines below are the same for you; #define FIL_RUNOUT_ENABLED_DEFAULT true #define NUM_RUNOUT_SENSORS 1 #define FIL_RUNOUT_STATE LOW #define FIL_RUNOUT_PULLUP This configuration worked fine on my ender 3 pro printer with SKR mini e3 v2 motherboard. It will probably work for you too.
With this file you will be able to print DIY Filament Runout Sensor with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on DIY Filament Runout Sensor.