Dive-Xtras BlackTip Stand Adjustable

prusaprinters

<p>This is a remix of my Piranha Adjustable Length Scooter Stand to fit the Black Tip Scooter using 170mm diameter tube.</p><p>The stand requires 2 X 1" PVC Tube where I used exterior diameter of about 33.9mm so it would fit snug but still movable. Center hole is optional for more stability but probably not required.</p><p>If you want to expose the honeycomb pattern, set the bottom and top layer to 0, I have posted the 3mf file with the settings and code, but you may want to export your own code using the stl since I used my Mk3S+ with MMU2 in single print color mode.&nbsp;</p><p>Printed using PETG, 10% Honeycomb Infill, printed in DRAFT, No Bottom and Top Layer. Set Fill angle to 0', Vertical layer set to 3.</p><p>Originally I printed using 15% infill but I found the 10% strong enough and also looked better with larger honeycombs and rotating the fill to 0' aligned the fills to my print much nicer.</p><p>If you don't want see through honeycomb look, you can use the stl file and export normally and use different fill pattern you prefer. I used the honeycomb for strength but also I think it looks pretty cool.</p><p>&nbsp;</p><p>&nbsp;</p><p>I appreciate your feedback and comments on this print.</p><p>&nbsp;</p><p>&nbsp;</p><p>Designed using Tinkercad.</p><p><br>&nbsp;</p>