Display Stand for HDMIPi

thingiverse

Display Stand for HDMIPi. This was designed with HDMIPi in mind. "Simple Stand" and "Stand with Stereo Speakers" are available options. Simple Plan - Component parts are "Stand", "Fastening-Pins", and "tray". Required files are: stand_031.stl, pin_031.stl, tray_031.stl. The "Stand" part may be too large to print for some compact 3D-Printers. Optional; Stereo Speakers plan - On the HDMi Driver Board, there is a speaker out connector present. Audio output lines of MC6019[Stereo Audio Power Amplifier IC] are connected to it. This plan will come to life once the printed pieces are assembled and speakers are connected to that connector. Needed items include: (2 Speakers & wire), "PHR-4" Connector housing & contacts, M3 Bolts & Nuts. The following 5 parts are required: stand_spk_031.stl, pin_031.stl, tray_031.stl, cover_spk_031.stl, spacer_spk_031.stl. I created this thing using 2W 8ohm miniature speakers and 8 pairs of 15mm long M3 Bolts & Nuts. There are many other options for speakers. Please remake or redesign to fit your preferred speakers. The AUTODESK 123D DESIGN CAD file is "HDMIPi_Stand_031.123dx". I'm not sure if the information mentioned here might be wrong or will change in the future, so please verify the connector shape, pin assignments and specification of Audio Amp IC. Print Settings: * Rafts: No * Supports: Yes * Resolution: 0.25mm * Infill: 30% * Notes: Printed on FlashForge Creator Pro with PrintInZ + Simplify3D material: PLA Temp: 210C Platform: 50C Skirt Outlines: 4 Skirt Offset from part: 0 (Brim) Printing Speed: 60mm/s XY Axis Movement speed: 60mm/s Z Axis Movement speed: 20mm/s