
Display AM 6/8
thingiverse
Here is the rewritten text: A non-disruptive display construction is required. To complete this, a hex bolt with a diameter of 5x40 and a 5mm nut are needed, along with four bolts measuring 3x30 with a nut and U-clip. The spacers are used to maintain a safe distance between the display and its cover. The holder will be attached to the frame using standard methods. I removed the signal indicator from the display and installed a print button instead, which I use as a reset button for my integrated Raspberry Pi. For the printer reset, I created a safety shield and applied it securely. Each user can decide how they want to proceed. Printing settings are set at 0.2mm thickness. Infill is set at 40% density. Display cover infill density is adjusted to 20%.
With this file you will be able to print Display AM 6/8 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Display AM 6/8.