Disney Foaming Soap Dispenser Mouse Ears

prusaprinters

I had this model up on another site but I have now removed it in favor of this one. I am uploading multiple versions of this. One that inserts into the mouth of the bottle that I have found to work well and then others I was experimenting with.I saw someone had made one of these but were charging for it on another site. I wanted one for a friend that loves Disney so I made one myself. The design could be touched up and fixed here and there but I am providing it for free so this is what you get. It isn't perfect by any means but either are the others that cost money lol. I may go back and design this better later but I doubt it.Main thing is it works as-is. Some prints didn't work as well as others but it depended on the filament I used. It works ONLY with Bath and Body Works foaming soap bottles.My model does not include a "guard" to keep your hand far enough away from the soap like others do. You will need to do this yourself as you pump. Just make sure your hand is not right up against it and it should work. If you do not get the mouse shape try again at different distances. The soap consistency also plays a factor here, too thin or too thick may not work. I refill my soap myself so I am unsure how it behaves with stock soap in the Bath and Body Works bottles. I have no new ones here to test it.Obviously I am not associated with Disney and this product is not from or associated with Disney. I am not claiming any ownership to the name Disney or anything related to that. This model is provided free as-is for a person to print and use at home but not for commercial purposes. Feel free to share the model but please give me attribution and remixes must be shared alike. Print settings: The only thing that really matters here is that you need to support underneath the tab that inserts into the bottle. That is the only place you need supports. Make sure there are none being created inside the model or anything like that.