Dishwasher Clean Dirty Sign

thingiverse

This is a sign that i made for my dishwasher. by using the knob you can change the sign to display either the words "Clean" or "Dirty". So no one ever needs to guess again if the dishes in the dishwasher are cleaned yet or not. The three main files you need to print are DishWasher_Top_STL (This is the top cover with the window) DishWasher_Base_STL (This is the bottom cover) DishWasher_Sign_STL (This is the part that says clean/dirty and has the knob on it) When putting it together, make sure that the sign is set to between clean and dirty in the window. there are small protrusions on the DishWasher_TOP_STL that stop the DishWasher_SIGN_STL from spinning all the way around. it stops the words when they are centered in the window. the DishWasher_Top_STL and DishWasher_Base_STL have matching clips that snap together. I found it was EASIEST to snap the BOTTOM clip in first, and then work your way around the edges. +++++++++++++++++++++++++++++++++ HOW TO PRINT MULTICOLORED +++++++++++++++++++++++++++++++++ I have some GCODE files for you, if you would like to print the Dishwasher_Sign_STL part in different colors. The directions are to print these GCODE files in this order HandleBase_GC (This will print the Flat section of the knob) HandleClean_GC (This will print the word Clean) HandleDirty_GC (This will print the word Dirty) HandleKnob_STL.stl (This will print the center knob) Swap to whatever color you want before each print. Do not remove the item off of the build plate until you have printed each of the 4 files in order. After each print you can change to the color of the filament that you want. All 4 files will build off each other and print on top. The Gcode was made with a layer height of 0.15mm. a nozzle temperature of 215C and a bet temperature of 60C. if you need a different temperature, first start the print. once the printer starts moving and doing the homing process, go to your printer display and change the temperature to whatever temperature you want. The rest of the files are for if anyone wants to mess around with them. I have also included the FUSION 360 files for anyone wanting to make any changes. All i ask is that you DO NOT SELL my product, and if you make any changes, to give credit to me and link to this original page.