Dishwasher Clean/Dirty Sign

prusaprinters

<p>Saw a few of these posted, but decided to design my own. A half twist of the knob switches between "Cllean" and "Dirty". I printed the Letters.stl in 2 colors. The first 1mm was the printed in the desired letter color (white). The rest was printed in a contrasting color.</p> <p>The knob was printed using supports, inside down. This allowed for a smoother turn. Knob is small enough to not need many supports.</p> <p>Backplate should fit tight, but I used a few drops of superglue because the magnets were stronger than the fit of the 2 parts.</p> <h3>Print instructions</h3><h3>Category: Kitchen &amp; Dining Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa<br/> <strong>Printer:</strong> I3 MK3S<br/> <strong>Resolution:</strong> 0.2mm<br/> <strong>Filament:</strong> Prusament PLA Galaxy Black, Hatchbox White<br/> <strong>Notes:</strong></p> <p>Twist the knob, and sign changes from "Clean" to "Dirty"</p> <p>Print the first 1mm of "Letters.stl" in color desired for letters. Print the rest in desired contrasting color.</p> <p>Knob is only part needing supports. Print it pin side down, to ensure a smooth interfacing surface against front cover</p> <p>Supeglue magnets inside the back plate. I needed 3x 8mm x 3mm magnets. Room for larger.</p>