dishwasher clean dirty Ampelmann

thingiverse

Dishwasher Clean Sign Instructions. To create this sign, I've inserted a loudspeaker ring magnet with dimensions d=47mm and h=8mm. The two components are now glued together. Here's how to make it: Slicing: If your magnet is of a different size, scale the object in X and Y axes. This will help your slicer find the correct position. First layer height: 0.3mm, subsequent layers: 0.2mm. No support is required. To modify the G-code, follow these steps: After the first layer has been printed, insert this code: Color change pause G1 X10 Y10 M300 S270 P100; Beep M300 S300 P100 M300 S330 P100 G4 P60000; Wait M300 S330 P100 G4 P6000; Wait OpenSCAD: If changes are required, insert the size of your magnet. The source files for the symbol have been adjusted in position and size. Printing: Change to red color and print stop.stl. Remove any unnecessary circles from the design and clean the symbol if necessary. Change to red color and print go.stl. Remove any unnecessary circles from the design and clean the symbol if necessary. Switch to black color and print the first layer up to the color change position. Then switch to white, print layer #2. After layer #2, switch to black "on the fly" and complete printing. Note: If you don't include a white layer between the red or green layers, they will appear very dark. Including a white layer in between helps achieve shiny colors. Filament Used: I used PETG filament for this sign. White ABS was used instead of PETG due to availability issues. Print Bed Preparation: The print bed is covered with kapton tape, which has been carefully cleaned with acetone. Photo: The white layers are visible at the outer diameter of the sign. In the middle of its height, it's glued together using (ABS/acetone in "natural" color).