DiscoEasy Hot End in the manner of the Expert+ Pack

cults3d

Hot End and X-axis like the Expert+ pack for trapezoidal or M8 screws. Verified and modified version for the left sides (slight modification of the screwdriver passage in diameter and angle to facilitate the installation and removal of the motor mounting screw) A 45mm LM8LUU bearing is required for this new head. This new head cannot be used without changing the X axis. The cable guide identical to the old versions has voluntarily not been changed unlike the Dagoma head, to allow the use and proper attachment of a cable chain. The X axis for trapezoidal screws requires nuts identical to those supplied with the original pack, but do not seem to be available for sale. To use the original M8 screws, print the files "Axe_X_right_M8.stl and Axe_X_left_M8.stl". To use the new Dagoma trapezoidal screws, print the files "X_axis_right_trapezoidal.stl and X_axis_left_butt_right_trapezoidal.stl Finally for the trapezoidal screw using the nut with play compensation corresponding to the drawing (Screw and nut distributed on Amazon, AliExpres, ...), print the files "Axe_X_right_trapezoidal_TR8.stl and Axe_X_left_butted_right_TR8.stl. Compatible with https://www.thingiverse.com/thing:3079634, https://www.thingiverse.com/thing:3080492 and https://www.thingiverse.com/thing:3081389 A BLtouch version of the head is now available https://www.thingiverse.com/thing:3099864 Hardware: -Hot end 1 bearing LML8UU (8x15X45) 1 LM8UU bearing (8x15x24) 3 M3x16 screws -X axis Right M8 version 1 M8 nut plus spring 1x10X15 Trapezoidal version 1 Trapezoidal dagoma nut with screws (3 x M4x12) Trapezoidal version TR8X8 4 screws M3x16 (Nut plate) -X axis Left M8 version 1 M8 nut plus spring 1x10X15 3 Screws M3x6 (Motor mounting) Trapezoidal version 1 Dagoma Trapezoidal Nut with screws (3 x M4x12) 3 x M3x6 screws (Engine mounting) Trapezoidal version TR8X8 4 screws M3x16 (nut plate) 3 Screws M3x6 (Motor mount) Revision of the holes the "Head lock" in the head.