Disc golf wall mount disc shelf for 3/4 rods

thingiverse

<h1>DESCRIPTION</h1> These wall-mounted brackets are designed to create disc shelves when paired with 3/4" dowels or similar rods. They provide ample space to accommodate large-diameter midranges, all drivers, and putters. <h2>PRINT SETTINGS/FILAMENT</h2> No supports are required for this design. I've successfully tested both PETG and PLA filaments, which work well together. ABS would also be a suitable choice, and a CF-filled Nylon could be used as an alternative. However, regular nylon is not recommended due to its flexibility issues. <h2>INSTALLATION</h2> You can use one bracket for each shelf or install three "middle" brackets to create a larger storage space. Keep in mind that using three middle brackets will reduce your disc storage capacity by about two discs. To ensure maximum security, I recommend securing the rods to the brackets with a 1/2" wood screw. Pre-drilling is advised to prevent layer separation and wood splitting during installation. I used blue plastic anchors and #10 screws to mount three 4-foot shelves on cinderblock walls in my basement. This design would also work well for drywall installations.