Direct drive extruder BI v2.5 with EzStruder low profile

thingiverse

This is a printable version of a direct drive extruder for a BI v2.5 that I have created by lowering the center of gravity from the last design (http://www.thingiverse.com/thing:758512). I tested this drive support with various materials such as Nylon 618 and T-Glass but unfortunately, I haven't had the opportunity to test it with ninjaflex yet. I recommend at least a 3 perimeter and 40% filling ABS for printing, followed by an acetone treatment. For this project, you will need several parts: EzStruder direct drive or bowden - either option works Low profile motor support printed part (see my thingiverse thing) 30x30mm Fan shroud v3 (or other version available on thingiverse) 3 fans of 30x30mm size (you may need different fan shroud if using a different size) 1 screw M3 x 24mm 2 screws M3 x 16mm 1 screw M3 x 10mm Note: If you plan to use an E3D-V6 hot end, please refer to the C clip design to install it: http://www.thingiverse.com/thing:1040276