Din rail mount

prusaprinters

<p>This is designed for my Ratrig VCore3</p> <p>I have attached a dimensions file for the Din rail - you need to cut out the ends to fit with a hole in the middle or alternative drill a hole in the middle up to you - but no matter what the rail does not fit directly on a 400x400 RR VCore3</p> <p>Im not 100% sure but i think you can just deduct 100mm or add 100 mm for the 300 or 500 model</p> <p>The small holes where you can add a M3 nut is for future use, im planing on designing some custom modules for tightening wires etc. but not done yet.. WIP :-)</p> <p>The mounts i found from VoronDesign Github page</p> <p><a href="https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets">https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets</a></p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>VCore3</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2</p></div> </p></p> Category: 3D Printer Accessories