DIN CASE FOR SONOFF BASIC R2
thingiverse
CASE FOR SONOFF BASIC R2 Width: 1.5 module (1 circuit breaker = 1 module) Items to Print: - 1 box - 1 cover - 1 spring clip - 1 pusher - 2 cable clamps Usage: - The front panel button activates the card switch (on/off). - A hole in the front allows viewing of the LED. Assembly and Integration with Board: - Place the spring clip in its housing, following the profile direction relative to the din rail. - Cut the front tab print support at the bottom of the case (refer to photo). - Insert the pusher into its hole and turn until it slides without friction. - Attach the Sonoff card under the rear tabs, then the front tab. - Connect terminal blocks, tighten cable clamps. - Secure the cover with 3 countersunk head screws M2.5-12. - Position the box on the din rail and secure the spring clip. IF YOU ENJOY THIS PROJECT, PLEASE LIKE, COMMENT, OR RECREATE IT!
With this file you will be able to print DIN CASE FOR SONOFF BASIC R2 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on DIN CASE FOR SONOFF BASIC R2.